Fisher "200" Series Cabinet Case and Knobs

[tasar]

WTB; Fisher Walnut Case / Knob, cabinets (case) from any 100/200 series integrated, amps, tuners should work. Also need tall single knob as used on Vol switch and any brights or gold knob caps and indicator lamp jewels.

[/b][/i]

[hermitcrab]

I saw somewhere on line there is a guy that is custom building these cases for restorers... especially for the Japan stereo crowd... Pioneers, marantz, etc...

[Firedome]

I have a bunch of the original knobs w/ and w/o the brasses, and the original "jewels". I'm holding onto them for now in case I find a unit cheap that needs them, but it's all on eBay as mentioned before, the "aftermarket" jewels are not exact duplicates of the originals but look good.

[tasar]

Well Firedome, if you could part with one of the two taller top knobs even without the "bright", I'd be grateful. The unit in need is my x202b but believe these particular singe action on/off or Vol knobs were same for the 100/200 sets . Please private message if you decide.

[tasar]

If someone knows the actual Vol ((single tall) knob for 200 series Fishers, exist at EBay, I'd sure appreciate a link !

[Firedome]

I'll take a look to see if I have anything to spare. The 1 piece 2 level ones are hardest to find.
I once bought a Fisher Custom Electra console just to grab all the knobs, replaced them with knobs from Rat Shack or somewhere, then sold that working console to a satisfied customer who didn't care the knobs were not original.

Over the last 40 years I've had probably 20 Fisher amps, preamps and tuners, and 3 or 4 consoles. Spares almost always came in handy, the knobs and brasses came from Germany and were fragile, glues often failed letting knob brasses and "jewels" fall off.

Quick TIP: Scott in the mid and late '60s used the same knobs as Fender so they can still be bought new at Antique Electronics in AZ.

[Firedome]

will PM shortly.

[Firedome]

I did find some stuff, PM has been sent.

[tasar]

Sourced please lock