Classic Hifi Care

What does this magnavox selector switch control go to?
I assume that a motor on the end. As it set only turns manually one direction
It's also a push switch
There is an resistor assembly that goes all around it. It's the black band
Thanks
Doug

A guess might be that switch is used as a volume control in a Stereo Theater with remote control.......

Thank you, Doug, for posting your location. We started that rule when we found ourselves fighting spambots. Other forums started requiring locations to battle the spambots. This information helps us to know which members are legit and which are spambots. Thank you for your cooperation and understanding.

Then there are the wafer switch sections. Didn't the Maggies sometimes used a stepped tone control for bass or treble, instead of continuously variable? Not sure what the additional section with resistors would be--maybe different loudness compensation for each tone step?

Chris Campbell

That makes sense, but I don't know of a Magnavox system that used remote control for the tone controls. The reason I mentioned a Stereo Theater is that my ST has a very similar switch, although I suspect the one pictured is newer then my Stereo Theater. I don't know if any of the Astro-Sonic stereos had remote control that worked with volume to tone controls....

Could it be a motorized function switch from a Astro-Sonic Stereo Theater. Those would be more sophisticated remotes.

Bill