They are, as I type this, finishing up a couple details then they are outa here! Over a year it took to build a 400 square foot workshop in our back yard. They had trouble with the paint. They had trouble with day laborers messing stuff up that had to be done over. They put the electrical outlets in the wrong spot. They put the pegboard on the walls wrong and that all had to be done over. They cut thru the irrigation line to the lawn sprinklers. This filled the ditch for the electrical conduit with dirt and that had to be all done over. The first painter not only used the wrong colors, he did not put on enough paint. The second painter made it look fantastic. There is almost 15 gallons of paint on a 400 square foot workshop. I painted the inside, that "was not on the contract". The LED lights make/made noise in radios. The upside is that the building is well-insulated and provides a clean signal for radio as long as you don't run LED lights. I don't know yet about how antenna TV will work. I'm glad to have the project done and over with. I would not do it again in a million years. The customer has little control over the process. The Registrar of Contractors protects the contractors, not the citizens. NEVER will I hire a job this large done for me again. If I can't do it myself, I'll do without. I restored cars too long. "Industry standard" work is not acceptable to me. Nothing is square unless I am on it constantly. This building is not bad in that regard.
The shop is finally done!
- electra225
- Site Admin
- Posts: 9032
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
The shop is finally done!
They are, as I type this, finishing up a couple details then they are outa here! Over a year it took to build a 400 square foot workshop in our back yard. They had trouble with the paint. They had trouble with day laborers messing stuff up that had to be done over. They put the electrical outlets in the wrong spot. They put the pegboard on the walls wrong and that all had to be done over. They cut thru the irrigation line to the lawn sprinklers. This filled the ditch for the electrical conduit with dirt and that had to be all done over. The first painter not only used the wrong colors, he did not put on enough paint. The second painter made it look fantastic. There is almost 15 gallons of paint on a 400 square foot workshop. I painted the inside, that "was not on the contract". The LED lights make/made noise in radios. The upside is that the building is well-insulated and provides a clean signal for radio as long as you don't run LED lights. I don't know yet about how antenna TV will work. I'm glad to have the project done and over with. I would not do it again in a million years. The customer has little control over the process. The Registrar of Contractors protects the contractors, not the citizens. NEVER will I hire a job this large done for me again. If I can't do it myself, I'll do without. I restored cars too long. "Industry standard" work is not acceptable to me. Nothing is square unless I am on it constantly. This building is not bad in that regard.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
- 19&41
- Global Moderator
- Posts: 1975
- Joined: Thu Jul 08, 2021 10:11 pm
- Location: Jonesboro, Georgia
- Contact:
Re: The shop is finally done!
I knew this day would come and that it would bring happiness. Congratulations!
"Any sufficiently advanced technology is indistinguishable from magic."
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
- William
- Global Moderator
- Posts: 5468
- Joined: Fri Jul 09, 2021 12:42 pm
- Location: Hart, Michigan
- Contact:
Re: The shop is finally done!
Finally, it is done! Congratulations, Greg. Now all you have is years of enjoyment in your new shop, and I hope it gives you years of just that.
Bill
Bill
- Hydrolastic
- Hero Member
- Posts: 362
- Joined: Sat Jul 10, 2021 2:13 am
- Location: Seattle WA USA
- Contact:
Re: The shop is finally done!
Right on! looking fwd to seeing what your working on.
- electra225
- Site Admin
- Posts: 9032
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
Re: The shop is finally done!
I've been working on radios so far. You can see those in "Radios and Tuners" on the forum. And I got a couple of my big stereos going, posted in "Magnavox". Have you got your plumbing project done?
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
- 19&41
- Global Moderator
- Posts: 1975
- Joined: Thu Jul 08, 2021 10:11 pm
- Location: Jonesboro, Georgia
- Contact:
Re: The shop is finally done!
Greg, now that you have a "studio", have you considered making some YouTube content of your own? They are always closed captioned.
"Any sufficiently advanced technology is indistinguishable from magic."
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
- electra225
- Site Admin
- Posts: 9032
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
Re: The shop is finally done!
I figure that I have this forum for content. My voice would not be appropriate for a YouTube video. I appreciate the suggestion. 
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
- electra225
- Site Admin
- Posts: 9032
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
Re: The shop is finally done!
We still have landscaping to do, but the building is done.

I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
- William
- Global Moderator
- Posts: 5468
- Joined: Fri Jul 09, 2021 12:42 pm
- Location: Hart, Michigan
- Contact:
Re: The shop is finally done!
It looks great, Greg!
Bill
Bill
- 19&41
- Global Moderator
- Posts: 1975
- Joined: Thu Jul 08, 2021 10:11 pm
- Location: Jonesboro, Georgia
- Contact:
Re: The shop is finally done!
Very nice!
"Any sufficiently advanced technology is indistinguishable from magic."
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
Re: The shop is finally done!
Enjoy... looks like a happy face!
Who is online
Users browsing this forum: No registered users and 2 guests
